Care and Feeding of your Cheese board

At S. Perry Creations, we take pride in creating unique and whimsical cheese boards that bring joy and laughter to any gathering. To ensure that your cheese board remains in top condition and continues to be a functional and fun addition to your collection, it is important to properly care for it.

Hand Washing

To clean your cheese board, we recommend hand washing it in warm water with mild soap. Avoid using harsh chemicals or abrasive scrubbers, as they can damage the surface of the board. Gently scrub the board with a soft sponge or cloth to remove any food residue. Rinse thoroughly with warm water and pat dry with a clean towel. Do not use in a Microwave Oven or wash in a dishwasher.

Recoating with Food Grade Mineral Oil

To maintain the beauty and longevity of your cheese board, it is recommended to periodically recoat it with Food Grade Mineral Oil. This helps to prevent the wood from drying out and cracking. Apply a thin layer of oil to the entire surface of the board using a clean cloth or paper towel. Allow the oil to penetrate the wood for a few minutes, then wipe off any excess. This simple step will help to keep your cheese board looking its best.

Mineral Oil/Wax Product

For added convenience, we offer a Mineral Oil/Wax product specifically designed for our cheese boards. This product combines the nourishing properties of Food Grade Mineral Oil with the protective benefits of wax. Simply apply a small amount of the Mineral Oil/Wax product to the board, spreading it evenly with a cloth or paper towel. Allow it to absorb into the wood, then buff the surface to a beautiful shine. This product is a great option for those who prefer an all-in-one solution for maintaining their cheese board.

By following these care instructions, you can ensure that your S. Perry Creations cheese board remains in excellent condition for years to come. Whether you're hosting a cheese tasting party or simply enjoying a quiet evening with a glass of wine and some cheese, our cheese boards are the perfect companion. Thank you for choosing S. Perry Creations!

Cutting Wire Alignment/replacement

If your cutting wire does not line up with the slot in the board it can be easily adjusted by pulling/pushing the metal bracket in or out in small increments until it seats into the slot.

If the wire or hardware breaks it can be replaced by unscrewing the screw in the handle then twisting the handle towards the wire. This will relieve the tension. You can then pull out the bracket and remove and replace the wire/handle, twist the handle away from the wire and insert the screw. Adjustments can be make to the wire lining up with the slot can be made by pushing/pulling on the bracket in small increments.